Manufacturer information according to GPSR Directive:

Sven Braunert

August-Bebel-Str. 40

07333 Unterwellenborn

Germany

Email: info@braunertpatches.de

GERMAN: (English below)

ironing instructions

A notice:
The classic sewing method is and remains the best way to attach a patch.
The following instructions are intended as a guideline only!

1. The iron must be really hot! Approx. 170-180 °C (cotton option level 3 / no steam!)
2. First, iron the area where you want to place the patch.
3. Spray some water on the back of the patch and place it on the spot with the embroidered side facing up.
4. Place a thin cotton cloth on the patch to avoid damage.
5. Now iron the patch on with proper pressure for about 40 seconds using circular movements.
Also iron nicely along the edges of the patch using the ironing tip.
(depending on the thickness of the fabric it may take a little longer)
6. Turn the fabric inside out and iron until dry. Then allow to cool for 3-5 minutes.
7. If you notice that the patch is not yet sticking properly, repeat the process until it does.
In this case, make sure that you put the cloth back on beforehand to avoid damaging the fabric.

Tip:
For problematic textiles, simply sew on the patch or stick it on with a textile adhesive.
Knee or elbow patches should also be secured with a few stitches.

-------------

washing and care instructions

Here are our recommendations.

* Use a gentle wash cycle and turn inside out.
* Washable up to max. 30°C (we recommend cold washing)
* Spin at max. 800 revolutions.
* Do not tumble dry.
* No dry cleaning (no fabric softener)
* Iron only at low temperature.

A notice:
Too high temperatures when washing or in the dryer would soften the adhesive and the patch could come off the fabric.

However, if you have sewn the patches, you can follow the instructions
ignore and wash as usual.

--------------

We hope you enjoy our applications.
www.BraunertPatches.de
info@braunertpatches.de

ENGLISH:

Iron-on instructions

Note:
The classic sewing is and remains the best way to attach a patch.
The following instructions are only for guidance.

1. The iron must be really hot! Approximately 170-180 ° C (option cotton level 3 / no steam!)
2. First iron the place where you want to place the patch.
3. Spray water on the back of the patch and place it on the spot with the embroidered side facing up.
4. Place a thin cotton cloth on the patch to avoid damage.
5. Now iron the patch with the right pressure for approx. 40 seconds in a circular motion.
Also iron nicely along the edges of the patch with the ironing tip.
(it may take a little longer depending on the thickness of the fabric)
6. Turn the textile inside out and iron dry. Then let cool for 3-5 minutes.
7. Note that the patch is not holding properly yet, then repeat the process until it holds properly.
In this case, make sure that you put the cloth back on before hand to avoid damaging the fabric.

Tip:
For problematic textiles, simply sew the patch on or stick on with a textile adhesive.
Knee or elbow patches should also be attached with a few stitches.

-------------

Washing and care instructions

Here are our recommendations.

* Use a gentle cycle and turn it “left”.
* Washable up to max. 30 ° C (however, we recommend cold washing)
* Spin with a maximum of 800 revolutions.
* Do not tumble dry.
* No dry cleaning (no fabric softener)
* Iron only at low temperature.

Note:
Excessively high temperatures during washing or in the tumble dryer would soften the adhesive and the patch could detach from the textile.

However, if you have sewn the patches on, you can ignore the information and wash as usual.